All Products
產品 Product
🔥 現貨供應 🔥
🪨 SHAPTON 刃之黑幕 #320
荒砥石（附專用收納盒）
━━━━━━━━━━━━━━━━━━━
✨ 這顆的重點
✔ #320 荒砥｜高效率修刃
✔ 陶瓷燒結｜硬質 × 切削力強
✔ Splash & Go｜不用長時間泡水
✔ 附收納盒｜可直接當砥石台使用
👉 很多人第一次用 SHAPTON，
就回不去。
━━━━━━━━━━━━━━━━━━━
📏 規格
砥石尺寸：
約 210 × 70 × 15 mm
外盒尺寸：
約 220 × 85 × 40 mm
🇯🇵 日本製
━━━━━━━━━━━━━━━━━━━
💰 NT$ 1,000
━━━━━━━━━━━━━━━━━━━
✨ 國外玩家普遍評價
SHAPTON #320 在國外磨刀圈，
一直都是很熱門的荒砥之一。
很多人會拿它來：
✔ 重建刃角
✔ 修復鈍刀
✔ 薄化（Thinning）
✔ 處理小缺口
━━━━━━━━━━━━━━━━━━━
👍 國外常見優點
✔ 切削速度快
✔ 石頭硬、不易變形
✔ 反饋清楚
✔ 不太需要泡水
✔ 對高硬度鋼反應很好
很多玩家特別喜歡：
👉 「硬石感」
磨起來會比傳統 KING 類型：
更俐落、更直接。
━━━━━━━━━━━━━━━━━━━
⚠️ 國外常提到的缺點
❗ 荒砥本身仍會耗損
（尤其重度薄化）
❗ 石頭偏硬
→ 新手如果角度不穩，
容易刮花刀面
❗ 不適合單獨完成磨刀
→ 一定要接中砥
❗ 需要補水
雖然是 Splash & Go，
但 #320 還是比高番數更吃水。
━━━━━━━━━━━━━━━━━━━
🛠 推薦用途
🔹 刀子很鈍
🔹 有小崩口
🔹 想快速重建角度
🔹 想做薄化修整
👉 這時候 #320 會非常有感。
━━━━━━━━━━━━━━━━━━━
⚠️ 使用注意事項
❗ 此為陶瓷燒結砥石
表面多少可能存在：
燒結紋、製程痕跡、類似裂紋感。
👉 那不是裂開，
也不影響使用。
SHAPTON 系列其實很常見。
━━━━━━━━━━━━━━━━━━━
❗ 不建議：
✔ 長時間浸泡
✔ 曝曬
✔ 使用清潔劑／油類
👉 正常 Splash & Go 即可。
━━━━━━━━━━━━━━━━━━━
✨ 為什麼很多人會選 SHAPTON
因為它的風格很明確：
✔ 快
✔ 硬
✔ 直接
✔ 很有「效率感」
尤其磨高硬鋼時，
會特別明顯。
━━━━━━━━━━━━━━━━━━━
📩 現貨在店
如果你已經有 #1000 ——
補一顆 #320，
很多修刀問題會輕鬆非常多。
━━━━━━━━━━━━━━━━━━━
#SHAPTON #刃之黑幕
#320番 #荒砥
#磨刀石 #日本製
#和欣行 #HeXinHang
🔥 In Stock 🔥
🪨 SHAPTON Kuromaku #320
Coarse Whetstone
(Includes Storage Case / Stone Holder)
━━━━━━━━━━━━━━━━━━━
✨ Highlights
✔ #320 Coarse Grit｜High-efficiency edge repair
✔ Ceramic Abrasive｜Hard × Aggressive Cutting Performance
✔ Splash & Go｜No long soaking required
✔ Includes Storage Case｜Can also be used as a stone base
👉 Many people try SHAPTON once and never go back.
━━━━━━━━━━━━━━━━━━━
📏 Specifications
Stone Size:
Approx. 210 × 70 × 15 mm
Case Size:
Approx. 220 × 85 × 40 mm
🇯🇵 Made in Japan
━━━━━━━━━━━━━━━━━━━
💰 NT$1,000
━━━━━━━━━━━━━━━━━━━
✨ Popular Among International Sharpening Communities
SHAPTON #320 has long been considered one of the most popular coarse stones among sharpening enthusiasts worldwide.
Common uses:
✔ Rebuilding edge geometry
✔ Restoring dull knives
✔ Thinning
✔ Repairing small chips
━━━━━━━━━━━━━━━━━━━
👍 Commonly Praised Features
✔ Fast cutting speed
✔ Hard surface, resists dishing
✔ Clear and direct feedback
✔ Minimal soaking required
✔ Excellent performance on hard steels
Many users especially enjoy:
👉 The "hard stone feel"
Compared to traditional softer stones like KING:
✔ Faster
✔ Cleaner
✔ More direct
━━━━━━━━━━━━━━━━━━━
⚠️ Common Feedback
❗ Coarse stones still wear over time
(Especially during heavy thinning work)
❗ Hard stone characteristics
→ Beginners with inconsistent angles may scratch blade surfaces more easily
❗ Not intended as a standalone stone
→ Must be followed by a medium grit stone
❗ Requires occasional water refresh
Although Splash & Go:
👉 #320 consumes more water than higher-grit stones.
━━━━━━━━━━━━━━━━━━━
🛠 Recommended Uses
🔹 Very dull knives
🔹 Small edge chips
🔹 Fast edge rebuilding
🔹 Blade thinning work
👉 This is where #320 becomes extremely useful.
━━━━━━━━━━━━━━━━━━━
⚠️ Notes
❗ Ceramic stone characteristics
Surface patterns, manufacturing marks, or hairline-like textures may appear.
👉 These are normal and do not affect performance.
Very common throughout the SHAPTON series.
━━━━━━━━━━━━━━━━━━━
❗ Not recommended:
✘ Long-term soaking
✘ Direct sunlight exposure
✘ Detergents or oils
👉 Simply use as Splash & Go.
━━━━━━━━━━━━━━━━━━━
✨ Why So Many People Choose SHAPTON
Because the character is very clear:
✔ Fast
✔ Hard
✔ Direct
✔ Extremely efficient
Especially when working on high-hardness steels.
━━━━━━━━━━━━━━━━━━━
📩 Available Now
If you already own a #1000 —
adding a #320 makes knife repair and edge restoration dramatically easier.
━━━━━━━━━━━━━━━━━━━
#SHAPTON
#Kuromaku
#320Grit
#CoarseStone
#Whetstone
#MadeInJapan
#HeXinHang
